What Edge Detection Parameters (EDP) should I use? When using WipFrag to analyze muck piles, you can use the following guidelines: Fines = Sliders to the right Medium = Sliders in the middle Large = Sliders to the left Generally, you want to have accurate nets on the small- to medium-sized particles. Once you find […]
Are you new to photoanalysis technology? Perhaps you have an installation, and would like to investigate other locations to improve efficiencies? Read on past the jump for some of WipWare’s most popular locations. Where would be an ideal location to install your technologies? There are 5 main locations where photoanalysis technologies are installed, all of […]
What happens to your blast fragmentation when you have excessive inter-row distance (burden)? Introduction – Excessive Burden According to Prasad et al. (2017), rock fragmentation size is a very important parameter for an economical point of view in any surface mining. Excessive inter-row distance, often referred to as an increased burden in blasting operations, can […]
Excessive burden in blasting refers to having too much rock mass in front of the blast holes. This is relative to the designed blast parameters. The burden is the distance between a blast hole and the free face. If this distance is too large, it can significantly impact the efficiency and effectiveness of the blasting […]
A Quick Summary on WipFrag version 4 and its New Features Overview Mining is the extraction of valuable materials called ore or sometimes industrial minerals from the earth crust, using appropriate technology with the aim to provide raw materials for industrial use. The materials exist in massive form and must therefore be broken into handable […]
One of the most common questions we receive is, “How small can you analyze?” The answer depends on multiple factors, but with the right imaging, WipWare’s systems can measure down to micron levels.
WipWare