{"id":2482,"date":"2019-03-25T15:55:48","date_gmt":"2019-03-25T19:55:48","guid":{"rendered":"http:\/\/wipware.com\/?p=2482"},"modified":"2026-10-15T13:58:47","modified_gmt":"2026-10-15T17:58:47","slug":"solo-installation-at-agnico-eagle-meliadine","status":"publish","type":"post","link":"https:\/\/wipware.com\/es\/news\/solo-installation-at-agnico-eagle-meliadine\/","title":{"rendered":"Puesta en marcha en solitario en la mina Agnico Eagle Meliadine"},"content":{"rendered":"

El 12 de marzo de 2019, el especialista t\u00e9cnico de WipWare, Marty Wanner, lleg\u00f3 a Agnico Eagle's. Meliadina<\/a><\/strong> Mina de oro en Nunavut, Canad\u00e1, para poner en marcha una Sistema de an\u00e1lisis del tama\u00f1o de part\u00edculas del transportador en l\u00ednea Solo<\/a><\/strong>. La visita incluy\u00f3 la verificaci\u00f3n de la instalaci\u00f3n existente, la confirmaci\u00f3n de la conectividad del sistema, la calibraci\u00f3n de las mediciones del tama\u00f1o de las part\u00edculas con respecto a los datos de an\u00e1lisis granulom\u00e9trico y la impartici\u00f3n de formaci\u00f3n t\u00e9cnica al personal de la mina.<\/p>\n\n\n\n

Situada aproximadamente a 25 kil\u00f3metros al norte de Rankin Inlet, en la regi\u00f3n de Kivalliq de Nunavut, Meliadine se estaba preparando para iniciar la producci\u00f3n comercial de oro cuando WipWare la visit\u00f3 en marzo de 2019.<\/p>\n\n\n\n

El sistema Solo hab\u00eda sido instalado por el equipo de Meliadine antes de la llegada de WipWare. Tras revisar la configuraci\u00f3n de la sala de control y la instalaci\u00f3n del equipo, Marty confirm\u00f3 la conectividad del sistema y procedi\u00f3 a la calibraci\u00f3n.<\/p>\n\n\n\n

\n
\"Mina<\/figure>\n\n\n\n
\"Sistema<\/figure>\n\n\n\n
\"Sistema<\/figure>\n<\/figure>\n\n\n\n

Para calibrar el sistema Solo, se tom\u00f3 una muestra cortada con cinta transportadora para su an\u00e1lisis granulom\u00e9trico. La distribuci\u00f3n del tama\u00f1o de part\u00edcula resultante se compar\u00f3 con las mediciones obtenidas con Solo.<\/p>\n\n\n\n

Dado que el an\u00e1lisis \u00f3ptico del tama\u00f1o de part\u00edcula mide el material visible en la superficie de la cinta transportadora, pueden existir diferencias entre estas mediciones y el an\u00e1lisis tradicional por tamizado de una muestra a granel. La calibraci\u00f3n ayuda a compensar estas diferencias, incluyendo la influencia de part\u00edculas finas que podr\u00edan no ser visibles para la c\u00e1mara.<\/p>\n\n\n\n

Utilizando los resultados comparativos, Marty calibr\u00f3 con \u00e9xito el sistema Solo para adaptarlo al material y a las condiciones de funcionamiento en Meliadine.<\/p>\n\n\n\n

Despu\u00e9s de la calibraci\u00f3n, WipWare proporcion\u00f3 una sesi\u00f3n de capacitaci\u00f3n que cubri\u00f3 el proceso de calibraci\u00f3n del sistema Solo y las caracter\u00edsticas de WipFrag<\/a><\/strong> software, incluyendo su aplicaci\u00f3n al an\u00e1lisis de fragmentaci\u00f3n por explosi\u00f3n.<\/p>\n\n\n\n

La visita concluy\u00f3 con la puesta en marcha satisfactoria del sistema Solo y la familiarizaci\u00f3n del personal con su funcionamiento.<\/p>\n\n\n\n

WipWare agradece al equipo de Meliadine su ayuda y cooperaci\u00f3n durante todo el proceso de puesta en marcha.<\/p>\n\n\n\n

Para conocer la generaci\u00f3n actual de tecnolog\u00eda de monitoreo automatizado de cintas transportadoras de WipWare, explore la Sistema de an\u00e1lisis de transportador individual<\/strong><\/a>, Dise\u00f1ado para medir continuamente la distribuci\u00f3n del tama\u00f1o de las part\u00edculas y otras caracter\u00edsticas del material para respaldar el monitoreo y la optimizaci\u00f3n del proceso.<\/em><\/p>","protected":false},"excerpt":{"rendered":"

WipWare puso en marcha con \u00e9xito un sistema de an\u00e1lisis del tama\u00f1o de part\u00edculas de la cinta transportadora Solo en la mina Meliadine de Agnico Eagle en Nunavut, utilizando an\u00e1lisis comparativo de tamizado para la calibraci\u00f3n y proporcionando formaci\u00f3n in situ para los operadores.<\/p>","protected":false},"author":6,"featured_media":6046,"comment_status":"closed","ping_status":"open","sticky":false,"template":"","format":"standard","meta":{"_acf_changed":false,"footnotes":""},"categories":[92],"tags":[89,94],"class_list":["post-2482","post","type-post","status-publish","format-standard","has-post-thumbnail","hentry","category-news","tag-mining","tag-solo"],"acf":{"related_posts":[{"ID":3162,"post_author":"6","post_date":"2019-11-14 11:53:54","post_date_gmt":"2019-11-14 16:53:54","post_content":"\n

In October 2019, WipWare successfully commissioned a Solo Online Conveyor Particle Size Analysis System<\/a><\/strong> at BHP's Jimblebar Mine in Western Australia. Working alongside BHP and Downer personnel, WipWare's Technical Specialist completed the system setup, verified functionality, and established real-time particle size monitoring to support fragmentation measurement and process optimization.<\/p>\n\n\n\n

\"WipWare<\/figure>\n\n\n\n

The team met on the first day for a safety discussion and to visit the location where the Solo System would be installed. Our Technical Specialist also reviewed the installation steps. BHP and the Downer team installed the Solo System and Hood while our specialist concentrated on the camera, verified functionality and collected sample images for setup.<\/p>\n\n\n\n

\"WipWare<\/figure>\n\n\n\n

After the set up was completed, a product demonstration\u00a0and a quick tutorial\u00a0with\u00a0WipFrag<\/strong><\/a>\u00a0software was done.<\/p>\n\n\n\n

The system will be able to detect very subtle changes in material size and shape allowing automation and optimization efforts.<\/p>\n\n\n\n

Thank you to everyone for your cooperation with the successful installation of WipWare\u2019s Solo System.<\/p>\n","post_title":"Solo Commissioning at BHP Jimblebar Mine, Australia","post_excerpt":"WipWare successfully installed and commissioned a Solo conveyor particle size analysis system at BHP's Jimblebar Mine in Western Australia, providing real-time fragmentation measurements to support process monitoring and optimization.","post_status":"publish","comment_status":"closed","ping_status":"open","post_password":"","post_name":"solo-commissioning-at-bhp-jimblebar-australia","to_ping":"","pinged":"","post_modified":"2026-10-14 14:44:20","post_modified_gmt":"2026-10-14 18:44:20","post_content_filtered":"","post_parent":0,"guid":"http:\/\/wipware.com\/?p=3162","menu_order":0,"post_type":"post","post_mime_type":"","comment_count":"0","filter":"raw"},{"ID":2493,"post_author":"6","post_date":"2019-04-05 15:09:42","post_date_gmt":"2019-04-05 19:09:42","post_content":"\n

In March 2019, WipWare representatives Thomas Palangio and Thomas de Sousa visited Pe\u00f1a Colorada<\/strong><\/a> Mine in Minatitl\u00e1n, Colima, Mexico, to install and commission a Solo Online Conveyor Particle Size Analysis System<\/a><\/strong>. The installation included establishing network connectivity and calibrating the system against sieve analysis data, enabling real-time particle size monitoring at the processing plant.<\/p>\n\n\n\n

\n
\"Pe\u00f1a<\/figure>\n\n\n\n
\"WipWare<\/figure>\n\n\n\n
\"WipWare<\/figure>\n<\/figure>\n\n\n\n

Following installation, the Solo system was connected to the Pe\u00f1a Colorada network and began collecting real-time particle size data. Sieve analysis results were used to calibrate the system, helping align its measurements with the operation's material characteristics and reporting requirements. The commissioning also included training on WipFrag<\/a><\/strong> 3.2, which served as the system's human-machine interface (HMI).<\/p>\n\n\n\n

Pe\u00f1a Colorada later highlighted the value of WipWare's real-time fragmentation monitoring technology in supporting autogenous grinding performance:<\/p>\n\n\n\n

\n

\"WipWare technology allows us to measure, monitor and control the distribution of size, shape, uniformity and volume of iron ore that feeds autogenous grinding, in real-time. This improves AG mill performance and increases milling efficiency, productivity and profit.\"<\/em> \u2014 Rub\u00ed Enciso P\u00e9rez, Pe\u00f1a Colorada<\/p>\n<\/blockquote>\n\n\n\n

With the help from the Pe\u00f1a Colorada team, WipWare representatives, Thomas Palangio and Thomas de Sousa, successfully completed the installation of the Solo System. The data quality generated from the Solo system is of excellent quality and the system has been successfully calibrated through sieve analyses to generate accurate and relevant size and volume data on the conveyor line. Moving forward, the Solo system will prove to be a highly effective tool to measure material size and shape telemetry in real-time.<\/p>\n\n\n\n

The story continues in 2020 with another WipWare system installation at Pe\u00f1a Colorada<\/strong><\/a>.<\/p>\n\n\n\n

For WipWare's latest conveyor monitoring technology, explore the Solo Conveyor Analysis System<\/strong><\/a>, designed to provide continuous particle size and material characterization data for industrial process monitoring and optimization.<\/em><\/p>\n","post_title":"Solo Commissioning at Pe\u00f1a Colorada Mine, Mexico","post_excerpt":"WipWare successfully commissioned a Solo conveyor particle size analysis system at Pe\u00f1a Colorada Mine in Mexico, using comparative sieve analysis to calibrate real-time fragmentation measurements.","post_status":"publish","comment_status":"closed","ping_status":"open","post_password":"","post_name":"pena-colorada-mexico-commissioning-of-solo-system","to_ping":"","pinged":"\nhttps:\/\/wipware.com\/news\/momentum-5-system-commission-at-pena-colorada\/","post_modified":"2026-10-15 11:54:15","post_modified_gmt":"2026-10-15 15:54:15","post_content_filtered":"","post_parent":0,"guid":"http:\/\/wipware.com\/?p=2493","menu_order":0,"post_type":"post","post_mime_type":"","comment_count":"1","filter":"raw"},{"ID":1837,"post_author":"6","post_date":"2018-10-05 14:26:54","post_date_gmt":"2018-10-05 18:26:54","post_content":"\n

In 2018, WipWare Technical Officer Thomas Palangio and Technical Specialist Marty Wanner travelled to Burkina Faso to install and commission a Solo Online Conveyor Particle Size Analysis System<\/a><\/strong> at Mana Gold Mine<\/a><\/strong>. At the time of the installation, Mana Mine was operated by SEMAFO, which was subsequently acquired by Endeavour Mining in July 2020.<\/p>\n\n\n\n

The Solo system was installed to provide automated particle size measurements and volumetric data to support material monitoring and process optimization.<\/p>\n\n\n\n

\"Thomas<\/figure>\n\n\n\n

Working alongside the SEMAFO team, WipWare reviewed the installation location and verified that the necessary equipment and infrastructure were ready for commissioning.<\/p>\n\n\n\n

The team collected a belt-cut sample for sieve analysis and used a calibration image to calculate the system's edge-detection parameters. These adjustments supported accurate particle identification and size measurement under the site's operating conditions.<\/p>\n\n\n\n

\n
\"WipWare<\/figure>\n\n\n\n
\"WipWare<\/figure>\n<\/figure>\n\n\n\n

In addition to particle size distribution, SEMAFO requested volumetric measurements. WipWare configured the system to provide these values alongside the fragmentation data, expanding the information available for process monitoring.<\/p>\n\n\n\n

Following the necessary adjustments, the Solo system was successfully commissioned and began collecting real-time measurement data.<\/p>\n\n\n\n

WipWare thanks the SEMAFO team for their hospitality and assistance throughout the installation and commissioning process.<\/p>\n\n\n\n

For WipWare's current generation of automated conveyor monitoring technology, explore the Solo Conveyor Analysis System<\/strong><\/a>, designed to continuously measure particle size distribution and other material characteristics to support process monitoring and optimization.<\/em><\/p>\n","post_title":"Solo Commissioning at SEMAFO Mana Mine, Burkina Faso","post_excerpt":"WipWare successfully commissioned a Solo conveyor particle size analysis system at SEMAFO's Mana Mine in Burkina Faso, establishing real-time particle size and volumetric monitoring.","post_status":"publish","comment_status":"closed","ping_status":"open","post_password":"","post_name":"successful-commissioning-in-burkina-faso","to_ping":"","pinged":"","post_modified":"2026-10-15 11:18:25","post_modified_gmt":"2026-10-15 15:18:25","post_content_filtered":"","post_parent":0,"guid":"http:\/\/wipware.com\/?p=1837","menu_order":0,"post_type":"post","post_mime_type":"","comment_count":"0","filter":"raw"},{"ID":2416,"post_author":"6","post_date":"2019-02-20 13:14:01","post_date_gmt":"2019-02-20 18:14:01","post_content":"\n

In February 2019, WipWare Technical Specialists Marty Wanner and Thomas de Sousa completed commissioning of a three-camera Momentum Online Conveyor Particle Size Analysis System at Detour Lake Mine<\/a><\/strong> in northeastern Ontario, Canada. Following an initial installation visit in December 2018, the team returned to commission the third camera and calibrate all three systems, establishing real-time particle size monitoring at the gold processing operation.<\/p>\n\n\n\n

\n
\"WipWare<\/figure>\n\n\n\n
\"WipWare<\/figure>\n<\/figure>\n\n\n\n

Detour Lake Mine is located in northeastern Ontario, approximately 300 kilometres northeast of Timmins and 185 kilometres by road northeast of Cochrane, within the Abitibi Greenstone Belt. At the time of WipWare's installation, the operation was owned by Detour Gold Corporation. The mine subsequently became part of Agnico Eagle Mines<\/a><\/strong> in 2022.<\/p>\n\n\n\n

With assistance from the Detour Gold team, WipWare completed commissioning of the third Momentum camera and successfully calibrated all three systems during the February visit.<\/p>\n\n\n\n

Following commissioning, the three cameras were collecting real-time particle size data, providing the operation with continuous measurements of material size and shape on its conveyors. Some of the new Momentum cameras were installed to replace older WipWare systems like the Solo 3 system pictured above just behind the newer Momentum system.<\/p>\n\n\n\n

WipWare thanks the Detour Gold team for their support throughout the installation and commissioning process.<\/p>\n\n\n\n

\n
\"WipWare<\/figure>\n<\/figure>\n\n\n\n

For WipWare's current generation of automated conveyor monitoring technology, explore the Solo Conveyor Analysis System<\/strong><\/a>, designed to continuously measure particle size distribution and other material characteristics to support process monitoring and optimization.<\/em><\/p>\n","post_title":"Momentum 3-Camera Commissioning at Detour Lake Mine","post_excerpt":"WipWare completed commissioning and calibration of a three-camera Momentum conveyor particle size analysis system at Detour Lake Mine in Ontario, establishing real-time fragmentation monitoring at the gold processing operation.","post_status":"publish","comment_status":"closed","ping_status":"open","post_password":"","post_name":"detour-gold-commissioning-trip-successful","to_ping":"","pinged":"","post_modified":"2026-10-15 10:56:02","post_modified_gmt":"2026-10-15 14:56:02","post_content_filtered":"","post_parent":0,"guid":"http:\/\/wipware.com\/?p=2416","menu_order":0,"post_type":"post","post_mime_type":"","comment_count":"0","filter":"raw"},{"ID":2392,"post_author":"6","post_date":"2019-02-08 15:47:08","post_date_gmt":"2019-02-08 20:47:08","post_content":"\n

In January 2019, WipWare Technical Specialist Marty Wanner visited Hanson's Bass Point Quarry<\/a><\/strong> in Shell Cove, New South Wales, Australia, to commission a three-camera Momentum 5 Online Conveyor Particle Size Analysis System. Working alongside Hanson personnel and WipWare's Australian reseller, Micron Scientific Australia<\/a><\/strong>, the team completed system calibration and commissioning, establishing real-time particle size monitoring across three conveyor measurement locations.<\/p>\n\n\n\n

\n
\"Momentum<\/figure>\n\n\n\n
\"Momentum<\/figure>\n\n\n\n
\"Momentum<\/figure>\n<\/figure>\n\n\n\n

The three Momentum 5 camera assemblies had been installed before WipWare's arrival. Because the systems were operating outdoors, sunlight canopies were installed to prevent direct sunlight from entering the analysis field and affecting measurement consistency.<\/p>\n\n\n\n

During commissioning, WipWare verified camera connectivity, completed calibration, and used sample material on the conveyors to confirm camera focus. All three measurement locations were successfully commissioned and began collecting real-time particle size data.<\/p>\n\n\n\n

Glen Blackstock of Micron Scientific Australia Pty Ltd., WipWare's local Value Added Reseller, also participated in the installation. Following commissioning, Hanson personnel received training on WipFrag, which served as the system's human-machine interface (HMI).<\/p>\n\n\n\n

The completed installation provided Hanson with continuous measurements of material size and shape, supporting the identification of changes in conveyor material and providing information that could be used for process monitoring and optimization.<\/p>\n\n\n\n

WipWare thanks the Hanson and Micron Scientific Australia teams for their cooperation throughout the successful commissioning.<\/p>\n\n\n\n

For WipWare's current generation of conveyor monitoring technology, explore the Solo Conveyor Analysis System<\/strong><\/a>, designed to continuously measure particle size distribution and other material characteristics in mining, aggregates, and industrial processing applications.<\/em><\/p>\n","post_title":"Momentum 5 Commissioning at Hanson Bass Point Quarry","post_excerpt":"WipWare commissioned a three-camera Momentum 5 conveyor particle size analysis system at Hanson's Bass Point Quarry in Australia, establishing real-time monitoring with outdoor camera protection and operator training.","post_status":"publish","comment_status":"closed","ping_status":"open","post_password":"","post_name":"hanson-commissioning-of-wipwares-momentum-5-system","to_ping":"","pinged":"","post_modified":"2026-10-15 11:07:27","post_modified_gmt":"2026-10-15 15:07:27","post_content_filtered":"","post_parent":0,"guid":"http:\/\/wipware.com\/?p=2392","menu_order":0,"post_type":"post","post_mime_type":"","comment_count":"0","filter":"raw"},{"ID":3274,"post_author":"6","post_date":"2020-02-04 15:06:25","post_date_gmt":"2020-02-04 20:06:25","post_content":"\n

In January 2020, WipWare technician Thomas de Sousa visited Pe\u00f1a Colorada<\/a><\/strong> in Mexico to commission a two-camera Momentum 5 Particle Size Analysis System. The installation expanded WipWare's presence at the iron ore operation, adding real-time particle size monitoring<\/a><\/strong> at two conveyor locations to support material characterization and process optimization.<\/p>\n\n\n\n

Pe\u00f1a Colorada was already using WipWare technology following the installation of a Solo 5 system in 2019<\/a><\/strong>. During the January 2020 visit, Thomas de Sousa also investigated software and connectivity issues affecting the existing Solo system. After inspecting the equipment, the team determined that the camera head would be returned to WipWare for further troubleshooting and repair.<\/p>\n\n\n\n

The new Momentum 5 installation consisted of two camera assemblies positioned above separate conveyor belts.<\/p>\n\n\n\n

\"\"<\/figure>
\n

Following an inspection of the preliminary installations, the Momentum frames were assembled and the electrical and network connections verified. The camera assemblies were then installed and calibrated to the site's operating conditions.<\/p>\n<\/div><\/div>\n\n\n\n

\n

Both systems were successfully commissioned and began collecting real-time particle size data.<\/p>\n\n\n\n

The following day, WipWare provided training to Pe\u00f1a Colorada personnel, familiarizing the team with the new equipment and its operation.<\/p>\n<\/div>

\"\"<\/figure><\/div>\n\n\n\n

Pe\u00f1a Colorada subsequently highlighted the value of WipWare\u2019s real-time fragmentation monitoring technology in supporting autogenous grinding performance:<\/p>\n\n\n\n

\n

WipWare technology allows us to measure, monitor and control the distribution of size, shape, uniformity and volume of iron ore that feeds autogenous grinding, in real-time. This improves AG mill performance and increases milling efficiency, productivity and profit.<\/em> \u2014 Rub\u00ed Enciso P\u00e9rez, Pe\u00f1a Colorada<\/p>\n\n\n\n

For WipWare's current generation of conveyor particle size monitoring technology, explore the Solo Conveyor Analysis System<\/strong><\/a>, designed to provide continuous measurements of particle size distribution and other material characteristics to support process monitoring and optimization.<\/em><\/p>\n<\/blockquote>\n","post_title":"Momentum 5 Commissioning at Pe\u00f1a Colorada, Mexico","post_excerpt":"WipWare commissioned a two-camera Momentum 5 particle size analysis system at Pe\u00f1a Colorada in Mexico, providing real-time iron ore measurements to support autogenous grinding performance and beneficiation efficiency.","post_status":"publish","comment_status":"closed","ping_status":"open","post_password":"","post_name":"momentum-5-system-commission-at-pena-colorada","to_ping":"","pinged":"https:\/\/wipware.com\/pena-colorada-mexico-commissioning-of-solo-system\/\nhttps:\/\/wipware.com\/reliable-systems-means-repeat-customers-at-iamgold\/\nhttps:\/\/wipware.com\/news\/pena-colorada-mexico-commissioning-of-solo-system\/","post_modified":"2026-10-15 11:55:24","post_modified_gmt":"2026-10-15 15:55:24","post_content_filtered":"","post_parent":0,"guid":"http:\/\/wipware.com\/?p=3274","menu_order":0,"post_type":"post","post_mime_type":"","comment_count":"1","filter":"raw"},{"ID":2473,"post_author":"6","post_date":"2019-03-09 11:20:44","post_date_gmt":"2019-03-09 16:20:44","post_content":"\n

In March 2019, WipWare Technical Specialists Marty Wanner and Andrew Palangio visited Rio Tinto Fer et Titane (RTFT)<\/a><\/strong> in Qu\u00e9bec to commission a Momentum 5 Conveyor Particle Analysis System. Working alongside personnel from Rio Tinto and engineering firm BBA<\/a><\/strong>, the team verified the camera installation, established workstation connectivity, and confirmed that the system was operational and collecting particle size data.<\/p>\n\n\n\n

Rio Tinto Fer et Titane (RTFT) has been processing ore from northern Quebec for more than 70 years. It is a world-leading producer of high-grade\u00a0titanium dioxide\u00a0feedstock. This product is commonly used as a pigment to whiten a range of products such as paint, textiles and paper. It also produces iron and steel used in specialized applications such as the automotive industry and wind turbines.<\/p>\n\n\n\n

\n
\"WipWare<\/figure>\n\n\n\n
\"WipWare<\/figure>\n<\/figure>\n\n\n\n

The Momentum 5 camera assembly had been installed before WipWare's arrival. During the site visit, the technical team inspected the installation and verified the physical connections. The work completed by Rio Tinto personnel was particularly well organized, with careful attention to electrical cabling and equipment placement.<\/p>\n\n\n\n

Once the electrical work was completed, WipWare connected to the system workstation and confirmed communication with the camera. The system was successfully brought online and began transmitting particle size data.<\/p>\n\n\n\n

Following commissioning, training was scheduled to familiarize Rio Tinto personnel with the Momentum 5 system and WipFrag software.<\/p>\n\n\n\n

The two-day visit was completed successfully through cooperation between WipWare, BBA, and Rio Tinto Fer et Titane. WipWare thanks everyone involved for their assistance and professionalism throughout the commissioning process.<\/p>\n\n\n\n

For WipWare's current generation of automated conveyor monitoring technology, explore the Solo Conveyor Analysis System<\/strong><\/a>, designed to continuously measure particle size distribution and other material characteristics to support industrial process monitoring and optimization.<\/em><\/p>\n","post_title":"Momentum 5 Commissioning at Rio Tinto Fer et Titane","post_excerpt":"WipWare successfully commissioned a Momentum 5 conveyor particle analysis system at Rio Tinto Fer et Titane in Quebec, working alongside BBA and Rio Tinto personnel to establish reliable connectivity and real-time particle size monitoring.","post_status":"publish","comment_status":"closed","ping_status":"open","post_password":"","post_name":"momentum-5-commissioning-at-rio-tinto-fer-et-titane","to_ping":"","pinged":"","post_modified":"2026-10-15 10:30:36","post_modified_gmt":"2026-10-15 14:30:36","post_content_filtered":"","post_parent":0,"guid":"http:\/\/wipware.com\/?p=2473","menu_order":0,"post_type":"post","post_mime_type":"","comment_count":"0","filter":"raw"},{"ID":6382,"post_author":"6","post_date":"2022-10-04 11:57:29","post_date_gmt":"2022-10-04 15:57:29","post_content":"\n

In February 2021, WipWare supported the installation of an upgraded Momentum 5 Conveyor Particle Analysis System at IAMGOLD's Rosebel Gold Mines<\/strong><\/a> in Suriname, South America. Nearly a decade after WipWare's first installation at the site in December 2011, the Rosebel team returned to WipWare for updated conveyor monitoring technology, demonstrating the value of reliable equipment and long-term technical support.<\/p>\n\n\n\n

WipWare's relationship with Rosebel Mine began in December 2011 with the installation of a Momentum 3 conveyor particle analysis system. Nearly ten years later, the operation invested in a newer Momentum 5 system, continuing its use of automated particle size measurement technology. At the time of the Momentum 5 installation, Rosebel Gold Mine was operated by IAMGOLD. The operation subsequently became part of Zijin Mining following its acquisition in 2023.<\/p>\n\n\n\n

The new Momentum 5 system was installed near the original equipment, providing a clear comparison between two generations of WipWare technology.<\/p>\n\n\n\n

\"Momentum<\/figure>\n\n\n\n

In February 2021, WipWare worked with the Rosebel team to configure the Momentum 5 system. Due to international travel restrictions, the site's personnel performed the installation with remote technical assistance from WipWare.<\/p>\n\n\n\n

WipWare's technical specialist helped the team configure the system and capture images for analysis, demonstrating how installation support could be delivered even when an on-site visit was not possible.<\/p>\n\n\n\n

Momentum 5 was designed for automated particle size analysis of material travelling on conveyor belts. In addition to particle size distribution (PSD), the system provided measurements of particle shape and estimated material volume, allowing operators to monitor changes in material characteristics over time.<\/p>\n\n\n\n

\"Momentum<\/figure>\n\n\n\n

These measurements could support process monitoring, identify changes in material feed, and provide historical data for evaluating operational performance.<\/p>\n\n\n\n

The Rosebel installation illustrates WipWare's commitment to long-term equipment reliability, continued product development, and technical support for customers operating around the world.<\/p>\n\n\n\n

For WipWare's current generation of automated conveyor monitoring technology, explore the Solo Conveyor Analysis System<\/strong><\/a>, designed to continuously measure particle size distribution and other material characteristics to support process monitoring and optimization.<\/em><\/p>\n","post_title":"Momentum 5 Upgrade at IAMGOLD's Rosebel Gold Mines","post_excerpt":"Nearly a decade after its original installation, Rosebel Gold Mine in Suriname returned to WipWare for an upgraded Momentum 5 conveyor particle size analysis system, with commissioning support provided remotely.","post_status":"publish","comment_status":"closed","ping_status":"open","post_password":"","post_name":"reliable-systems-means-repeat-customers-at-iamgold","to_ping":"","pinged":"https:\/\/wipware.com\/momentum-5-system-commission-at-pena-colorada\/\nhttps:\/\/wipware.com\/de-beers-gahcho-kue-mine-momentum-5-commissioning\/","post_modified":"2026-10-15 11:33:08","post_modified_gmt":"2026-10-15 15:33:08","post_content_filtered":"","post_parent":0,"guid":"https:\/\/wipware.com\/?p=6382","menu_order":0,"post_type":"post","post_mime_type":"","comment_count":"0","filter":"raw"},{"ID":2876,"post_author":"6","post_date":"2019-06-25 16:00:58","post_date_gmt":"2019-06-25 20:00:58","post_content":"\n

In June 2019, a WipWare Technical Specialist visited Coeur Rochester Mine<\/a><\/strong> near Lovelock, Nevada, to install and commission a Vertex-S Conveyor Particle Analysis System<\/strong><\/a>. Working alongside the Thyssenkrupp<\/a><\/strong> team, WipWare configured the system for a two-month evaluation of automated oversize detection and its potential application in crusher optimization.<\/p>\n\n\n\n

It's always nice to be able to take in some local scenery and enjoy the trip, even when it's business. As our Technical Specialist made his way to the Lovelock installation site, he had the pleasure of enjoying the stark, sun-drenched Basin and Range landscape through Reno, Nevada.\u00a0For anyone in the geotechnical field, the drive offers a front-row seat to the region's classic fault-block topography, tracking the volcanic cuts of the Truckee River Canyon before opening up into the vast, ancient Lahontan playa flats that define northern Nevada's mining country.<\/p>\n\n\n\n

\n
\"Nevada,<\/figure>\n\n\n\n
\"Reno,<\/figure>\n\n\n\n
\"Nevada,<\/figure>\n<\/figure>\n\n\n\n
\"WipWare<\/figure>
\n

Following the installation of the Vertex-S frame, the camera was focused and the scale was set. Additional installation of the fabric canopy will take place at a later time after lighting has been installed.<\/p>\n<\/div><\/div>\n\n\n\n

The product installed is a Vertex-S conveyor particle analysis system. This WipWare technology should perform very well in this application. The system will be able to detect oversize material allowing automation and improve crusher output optimization efforts.<\/p>\n\n\n\n

Thank you to the Thyssenkrupp team for working with our technical specialist for a successful installation and commissioning.<\/p>\n\n\n\n

For WipWare's current conveyor particle size monitoring technology, explore the Solo Conveyor Analysis System<\/a><\/strong>, designed for continuous measurement of particle size and other material characteristics in industrial operations.<\/em><\/p>\n","post_title":"Vertex-S Commissioning at Coeur Rochester Mine","post_excerpt":"WipWare installed and configured a Vertex S conveyor particle analysis system at Coeur Rochester Mine in Nevada, supporting the evaluation of automated oversize detection and crusher optimization.","post_status":"publish","comment_status":"closed","ping_status":"open","post_password":"","post_name":"vertex-s-installation-in-lovelock-nevada-thyssenkrupp-coeur-rochester-mine-site","to_ping":"","pinged":"","post_modified":"2026-10-15 12:28:24","post_modified_gmt":"2026-10-15 16:28:24","post_content_filtered":"","post_parent":0,"guid":"http:\/\/wipware.com\/?p=2876","menu_order":0,"post_type":"post","post_mime_type":"","comment_count":"0","filter":"raw"}]},"yoast_head":"\nSolo Commissioning at Agnico Eagle Meliadine • WipWare<\/title>\n<meta name=\"description\" content=\"WipWare commissioned a Solo conveyor particle size analysis system at Agnico Eagle's Meliadine Mine in Nunavut, including calibration using sieve analysis.\" \/>\n<meta name=\"robots\" content=\"index, follow, max-snippet:-1, max-image-preview:large, max-video-preview:-1\" \/>\n<link rel=\"canonical\" href=\"https:\/\/wipware.com\/es\/news\/solo-installation-at-agnico-eagle-meliadine\/\" \/>\n<meta property=\"og:locale\" content=\"es_ES\" \/>\n<meta property=\"og:type\" content=\"article\" \/>\n<meta property=\"og:title\" content=\"WipWare Solo Commissioned at Agnico Eagle Meliadine\" \/>\n<meta property=\"og:description\" content=\"WipWare completed Solo commissioning at Agnico Eagle's Meliadine Mine in Nunavut, including system calibration and hands-on technical training.\" \/>\n<meta property=\"og:url\" content=\"https:\/\/wipware.com\/es\/news\/solo-installation-at-agnico-eagle-meliadine\/\" \/>\n<meta property=\"og:site_name\" content=\"WipWare\" \/>\n<meta property=\"article:publisher\" content=\"https:\/\/www.facebook.com\/WipWare\/\" \/>\n<meta property=\"article:published_time\" content=\"2019-03-25T19:55:48+00:00\" \/>\n<meta property=\"article:modified_time\" content=\"2026-10-15T17:58:47+00:00\" \/>\n<meta property=\"og:image\" content=\"https:\/\/wipware.com\/wp-content\/uploads\/2021\/06\/IMG_0697-956x717-1.jpg\" \/>\n\t<meta property=\"og:image:width\" content=\"956\" \/>\n\t<meta property=\"og:image:height\" content=\"717\" \/>\n\t<meta property=\"og:image:type\" content=\"image\/jpeg\" \/>\n<meta name=\"author\" content=\"Kim Coyle\" \/>\n<meta name=\"twitter:card\" content=\"summary_large_image\" \/>\n<meta name=\"twitter:title\" content=\"Solo Commissioning at Agnico Eagle Meliadine Mine • WipWare\" \/>\n<meta name=\"twitter:description\" content=\"WipWare successfully commissioned a Solo conveyor particle size analysis system at Agnico Eagle's Meliadine Mine in Nunavut, using comparative sieve analysis for calibration and providing on-site operator training.\" \/>\n<meta name=\"twitter:creator\" content=\"@WipWare\" \/>\n<meta name=\"twitter:site\" content=\"@WipWare\" \/>\n<meta name=\"twitter:label1\" content=\"Escrito por\" \/>\n\t<meta name=\"twitter:data1\" content=\"Kim Coyle\" \/>\n\t<meta name=\"twitter:label2\" content=\"Tiempo estimado de lectura\" \/>\n\t<meta name=\"twitter:data2\" content=\"2 minutos\" \/>\n<script type=\"application\/ld+json\" class=\"yoast-schema-graph\">{\"@context\":\"https:\\\/\\\/schema.org\",\"@graph\":[{\"@type\":\"NewsArticle\",\"@id\":\"https:\\\/\\\/wipware.com\\\/news\\\/solo-installation-at-agnico-eagle-meliadine\\\/#article\",\"isPartOf\":{\"@id\":\"https:\\\/\\\/wipware.com\\\/news\\\/solo-installation-at-agnico-eagle-meliadine\\\/\"},\"author\":{\"name\":\"Kim Coyle\",\"@id\":\"https:\\\/\\\/wipware.com\\\/it\\\/#\\\/schema\\\/person\\\/44f82b527b7df4ccce9afb09c1f1c375\"},\"headline\":\"Solo Commissioning at Agnico Eagle Meliadine Mine\",\"datePublished\":\"2019-03-25T19:55:48+00:00\",\"dateModified\":\"2026-10-15T17:58:47+00:00\",\"mainEntityOfPage\":{\"@id\":\"https:\\\/\\\/wipware.com\\\/news\\\/solo-installation-at-agnico-eagle-meliadine\\\/\"},\"wordCount\":296,\"publisher\":{\"@id\":\"https:\\\/\\\/wipware.com\\\/it\\\/#organization\"},\"image\":{\"@id\":\"https:\\\/\\\/wipware.com\\\/news\\\/solo-installation-at-agnico-eagle-meliadine\\\/#primaryimage\"},\"thumbnailUrl\":\"https:\\\/\\\/wipware.com\\\/wp-content\\\/uploads\\\/2021\\\/06\\\/IMG_0697-956x717-1.jpg\",\"keywords\":[\"Mining\",\"Solo\"],\"articleSection\":[\"News\"],\"inLanguage\":\"es-CL\"},{\"@type\":\"WebPage\",\"@id\":\"https:\\\/\\\/wipware.com\\\/news\\\/solo-installation-at-agnico-eagle-meliadine\\\/\",\"url\":\"https:\\\/\\\/wipware.com\\\/news\\\/solo-installation-at-agnico-eagle-meliadine\\\/\",\"name\":\"Solo Commissioning at Agnico Eagle Meliadine • WipWare\",\"isPartOf\":{\"@id\":\"https:\\\/\\\/wipware.com\\\/it\\\/#website\"},\"primaryImageOfPage\":{\"@id\":\"https:\\\/\\\/wipware.com\\\/news\\\/solo-installation-at-agnico-eagle-meliadine\\\/#primaryimage\"},\"image\":{\"@id\":\"https:\\\/\\\/wipware.com\\\/news\\\/solo-installation-at-agnico-eagle-meliadine\\\/#primaryimage\"},\"thumbnailUrl\":\"https:\\\/\\\/wipware.com\\\/wp-content\\\/uploads\\\/2021\\\/06\\\/IMG_0697-956x717-1.jpg\",\"datePublished\":\"2019-03-25T19:55:48+00:00\",\"dateModified\":\"2026-10-15T17:58:47+00:00\",\"description\":\"WipWare commissioned a Solo conveyor particle size analysis system at Agnico Eagle's Meliadine Mine in Nunavut, including calibration using sieve analysis.\",\"breadcrumb\":{\"@id\":\"https:\\\/\\\/wipware.com\\\/news\\\/solo-installation-at-agnico-eagle-meliadine\\\/#breadcrumb\"},\"inLanguage\":\"es-CL\",\"potentialAction\":[{\"@type\":\"ReadAction\",\"target\":[\"https:\\\/\\\/wipware.com\\\/news\\\/solo-installation-at-agnico-eagle-meliadine\\\/\"]}]},{\"@type\":\"ImageObject\",\"inLanguage\":\"es-CL\",\"@id\":\"https:\\\/\\\/wipware.com\\\/news\\\/solo-installation-at-agnico-eagle-meliadine\\\/#primaryimage\",\"url\":\"https:\\\/\\\/wipware.com\\\/wp-content\\\/uploads\\\/2021\\\/06\\\/IMG_0697-956x717-1.jpg\",\"contentUrl\":\"https:\\\/\\\/wipware.com\\\/wp-content\\\/uploads\\\/2021\\\/06\\\/IMG_0697-956x717-1.jpg\",\"width\":956,\"height\":717,\"caption\":\"WipWare Solo conveyor particle size analysis system at Agnico Eagle Meliadine Mine, Nunavut.\"},{\"@type\":\"BreadcrumbList\",\"@id\":\"https:\\\/\\\/wipware.com\\\/news\\\/solo-installation-at-agnico-eagle-meliadine\\\/#breadcrumb\",\"itemListElement\":[{\"@type\":\"ListItem\",\"position\":1,\"name\":\"Home\",\"item\":\"https:\\\/\\\/wipware.com\\\/\"},{\"@type\":\"ListItem\",\"position\":2,\"name\":\"Solo at Agnico Eagle Meliadine\"}]},{\"@type\":\"WebSite\",\"@id\":\"https:\\\/\\\/wipware.com\\\/it\\\/#website\",\"url\":\"https:\\\/\\\/wipware.com\\\/it\\\/\",\"name\":\"WipWare Inc\",\"description\":\"Real-Time Fragmentation Analysis Systems & Software\",\"publisher\":{\"@id\":\"https:\\\/\\\/wipware.com\\\/it\\\/#organization\"},\"alternateName\":\"WipWare\",\"potentialAction\":[{\"@type\":\"SearchAction\",\"target\":{\"@type\":\"EntryPoint\",\"urlTemplate\":\"https:\\\/\\\/wipware.com\\\/it\\\/?s={search_term_string}\"},\"query-input\":{\"@type\":\"PropertyValueSpecification\",\"valueRequired\":true,\"valueName\":\"search_term_string\"}}],\"inLanguage\":\"es-CL\"},{\"@type\":\"Organization\",\"@id\":\"https:\\\/\\\/wipware.com\\\/it\\\/#organization\",\"name\":\"WipWare Inc\",\"alternateName\":\"WipWare\",\"url\":\"https:\\\/\\\/wipware.com\\\/it\\\/\",\"logo\":{\"@type\":\"ImageObject\",\"inLanguage\":\"es-CL\",\"@id\":\"https:\\\/\\\/wipware.com\\\/it\\\/#\\\/schema\\\/logo\\\/image\\\/\",\"url\":\"https:\\\/\\\/wipware.com\\\/wp-content\\\/uploads\\\/2023\\\/09\\\/W-Social-Icon.jpg\",\"contentUrl\":\"https:\\\/\\\/wipware.com\\\/wp-content\\\/uploads\\\/2023\\\/09\\\/W-Social-Icon.jpg\",\"width\":400,\"height\":400,\"caption\":\"WipWare Inc\"},\"image\":{\"@id\":\"https:\\\/\\\/wipware.com\\\/it\\\/#\\\/schema\\\/logo\\\/image\\\/\"},\"sameAs\":[\"https:\\\/\\\/www.facebook.com\\\/WipWare\\\/\",\"https:\\\/\\\/x.com\\\/WipWare\",\"https:\\\/\\\/www.instagram.com\\\/wipware\\\/\",\"https:\\\/\\\/www.linkedin.com\\\/company\\\/wipware-inc-\\\/\",\"https:\\\/\\\/www.youtube.com\\\/user\\\/Wipware\"],\"description\":\"WipWare Inc. is a pioneer in optical particle analysis, developing advanced software and automated measurement systems for mining, mineral processing, aggregates and other bulk material industries. WipWare technologies measure particle size distribution, shape, volume and colour using field images, vehicle-mounted systems and continuous conveyor monitoring to help operations improve process control, fragmentation performance and production efficiency.\",\"email\":\"sales@wipware.com\",\"telephone\":\"+1-705-472-2664\",\"legalName\":\"WipWare Inc\",\"foundingDate\":\"1986-05-18\",\"taxID\":\"894994771\",\"numberOfEmployees\":{\"@type\":\"QuantitativeValue\",\"minValue\":\"1\",\"maxValue\":\"10\"},\"publishingPrinciples\":\"https:\\\/\\\/wipware.com\\\/newsfeed\\\/\",\"ownershipFundingInfo\":\"https:\\\/\\\/wipware.com\\\/about-us\\\/\",\"actionableFeedbackPolicy\":\"https:\\\/\\\/wipware.com\\\/privacy-policy\\\/\",\"correctionsPolicy\":\"https:\\\/\\\/wipware.com\\\/terms-and-conditions\\\/\",\"ethicsPolicy\":\"https:\\\/\\\/wipware.com\\\/about-us\\\/\",\"diversityPolicy\":\"https:\\\/\\\/wipware.com\\\/about-us\\\/\",\"diversityStaffingReport\":\"https:\\\/\\\/wipware.com\\\/about-us\\\/\"},{\"@type\":\"Person\",\"@id\":\"https:\\\/\\\/wipware.com\\\/it\\\/#\\\/schema\\\/person\\\/44f82b527b7df4ccce9afb09c1f1c375\",\"name\":\"Kim Coyle\",\"image\":{\"@type\":\"ImageObject\",\"inLanguage\":\"es-CL\",\"@id\":\"https:\\\/\\\/secure.gravatar.com\\\/avatar\\\/f5dce10b9fd06f52ce046161568a2bf9802a102cbfbe74d1ca5ac2312482d633?s=96&d=mm&r=g\",\"url\":\"https:\\\/\\\/secure.gravatar.com\\\/avatar\\\/f5dce10b9fd06f52ce046161568a2bf9802a102cbfbe74d1ca5ac2312482d633?s=96&d=mm&r=g\",\"contentUrl\":\"https:\\\/\\\/secure.gravatar.com\\\/avatar\\\/f5dce10b9fd06f52ce046161568a2bf9802a102cbfbe74d1ca5ac2312482d633?s=96&d=mm&r=g\",\"caption\":\"Kim Coyle\"},\"url\":\"https:\\\/\\\/wipware.com\\\/es\\\/author\\\/kimcoyle\\\/\"}]}<\/script>\n<!-- \/ Yoast SEO Premium plugin. -->","yoast_head_json":{"title":"Puesta en marcha en solitario en Agnico Eagle Meliadine \u2022 WipWare","description":"WipWare encarg\u00f3 un sistema de an\u00e1lisis del tama\u00f1o de part\u00edculas mediante cinta transportadora Solo a la mina Meliadine de Agnico Eagle en Nunavut, incluyendo la calibraci\u00f3n mediante an\u00e1lisis de tamizado.","robots":{"index":"index","follow":"follow","max-snippet":"max-snippet:-1","max-image-preview":"max-image-preview:large","max-video-preview":"max-video-preview:-1"},"canonical":"https:\/\/wipware.com\/es\/news\/solo-installation-at-agnico-eagle-meliadine\/","og_locale":"es_ES","og_type":"article","og_title":"WipWare Solo Commissioned at Agnico Eagle Meliadine","og_description":"WipWare completed Solo commissioning at Agnico Eagle's Meliadine Mine in Nunavut, including system calibration and hands-on technical training.","og_url":"https:\/\/wipware.com\/es\/news\/solo-installation-at-agnico-eagle-meliadine\/","og_site_name":"WipWare","article_publisher":"https:\/\/www.facebook.com\/WipWare\/","article_published_time":"2019-03-25T19:55:48+00:00","article_modified_time":"2026-10-15T17:58:47+00:00","og_image":[{"width":956,"height":717,"url":"https:\/\/wipware.com\/wp-content\/uploads\/2021\/06\/IMG_0697-956x717-1.jpg","type":"image\/jpeg"}],"author":"Kim Coyle","twitter_card":"summary_large_image","twitter_title":"Solo Commissioning at Agnico Eagle Meliadine Mine • WipWare","twitter_description":"WipWare successfully commissioned a Solo conveyor particle size analysis system at Agnico Eagle's Meliadine Mine in Nunavut, using comparative sieve analysis for calibration and providing on-site operator training.","twitter_creator":"@WipWare","twitter_site":"@WipWare","twitter_misc":{"Escrito por":"Kim Coyle","Tiempo estimado de lectura":"2 minutos"},"schema":{"@context":"https:\/\/schema.org","@graph":[{"@type":"NewsArticle","@id":"https:\/\/wipware.com\/news\/solo-installation-at-agnico-eagle-meliadine\/#article","isPartOf":{"@id":"https:\/\/wipware.com\/news\/solo-installation-at-agnico-eagle-meliadine\/"},"author":{"name":"Kim Coyle","@id":"https:\/\/wipware.com\/it\/#\/schema\/person\/44f82b527b7df4ccce9afb09c1f1c375"},"headline":"Solo Commissioning at Agnico Eagle Meliadine Mine","datePublished":"2019-03-25T19:55:48+00:00","dateModified":"2026-10-15T17:58:47+00:00","mainEntityOfPage":{"@id":"https:\/\/wipware.com\/news\/solo-installation-at-agnico-eagle-meliadine\/"},"wordCount":296,"publisher":{"@id":"https:\/\/wipware.com\/it\/#organization"},"image":{"@id":"https:\/\/wipware.com\/news\/solo-installation-at-agnico-eagle-meliadine\/#primaryimage"},"thumbnailUrl":"https:\/\/wipware.com\/wp-content\/uploads\/2021\/06\/IMG_0697-956x717-1.jpg","keywords":["Mining","Solo"],"articleSection":["News"],"inLanguage":"es-CL"},{"@type":"WebPage","@id":"https:\/\/wipware.com\/news\/solo-installation-at-agnico-eagle-meliadine\/","url":"https:\/\/wipware.com\/news\/solo-installation-at-agnico-eagle-meliadine\/","name":"Puesta en marcha en solitario en Agnico Eagle Meliadine \u2022 WipWare","isPartOf":{"@id":"https:\/\/wipware.com\/it\/#website"},"primaryImageOfPage":{"@id":"https:\/\/wipware.com\/news\/solo-installation-at-agnico-eagle-meliadine\/#primaryimage"},"image":{"@id":"https:\/\/wipware.com\/news\/solo-installation-at-agnico-eagle-meliadine\/#primaryimage"},"thumbnailUrl":"https:\/\/wipware.com\/wp-content\/uploads\/2021\/06\/IMG_0697-956x717-1.jpg","datePublished":"2019-03-25T19:55:48+00:00","dateModified":"2026-10-15T17:58:47+00:00","description":"WipWare encarg\u00f3 un sistema de an\u00e1lisis del tama\u00f1o de part\u00edculas mediante cinta transportadora Solo a la mina Meliadine de Agnico Eagle en Nunavut, incluyendo la calibraci\u00f3n mediante an\u00e1lisis de tamizado.","breadcrumb":{"@id":"https:\/\/wipware.com\/news\/solo-installation-at-agnico-eagle-meliadine\/#breadcrumb"},"inLanguage":"es-CL","potentialAction":[{"@type":"ReadAction","target":["https:\/\/wipware.com\/news\/solo-installation-at-agnico-eagle-meliadine\/"]}]},{"@type":"ImageObject","inLanguage":"es-CL","@id":"https:\/\/wipware.com\/news\/solo-installation-at-agnico-eagle-meliadine\/#primaryimage","url":"https:\/\/wipware.com\/wp-content\/uploads\/2021\/06\/IMG_0697-956x717-1.jpg","contentUrl":"https:\/\/wipware.com\/wp-content\/uploads\/2021\/06\/IMG_0697-956x717-1.jpg","width":956,"height":717,"caption":"WipWare Solo conveyor particle size analysis system at Agnico Eagle Meliadine Mine, Nunavut."},{"@type":"BreadcrumbList","@id":"https:\/\/wipware.com\/news\/solo-installation-at-agnico-eagle-meliadine\/#breadcrumb","itemListElement":[{"@type":"ListItem","position":1,"name":"Home","item":"https:\/\/wipware.com\/"},{"@type":"ListItem","position":2,"name":"Solo at Agnico Eagle Meliadine"}]},{"@type":"WebSite","@id":"https:\/\/wipware.com\/it\/#website","url":"https:\/\/wipware.com\/it\/","name":"WipWare Inc.","description":"Software y sistemas de an\u00e1lisis de fragmentaci\u00f3n en tiempo real","publisher":{"@id":"https:\/\/wipware.com\/it\/#organization"},"alternateName":"WipWare","potentialAction":[{"@type":"SearchAction","target":{"@type":"EntryPoint","urlTemplate":"https:\/\/wipware.com\/it\/?s={search_term_string}"},"query-input":{"@type":"PropertyValueSpecification","valueRequired":true,"valueName":"search_term_string"}}],"inLanguage":"es-CL"},{"@type":"Organization","@id":"https:\/\/wipware.com\/it\/#organization","name":"WipWare Inc.","alternateName":"WipWare","url":"https:\/\/wipware.com\/it\/","logo":{"@type":"ImageObject","inLanguage":"es-CL","@id":"https:\/\/wipware.com\/it\/#\/schema\/logo\/image\/","url":"https:\/\/wipware.com\/wp-content\/uploads\/2023\/09\/W-Social-Icon.jpg","contentUrl":"https:\/\/wipware.com\/wp-content\/uploads\/2023\/09\/W-Social-Icon.jpg","width":400,"height":400,"caption":"WipWare Inc"},"image":{"@id":"https:\/\/wipware.com\/it\/#\/schema\/logo\/image\/"},"sameAs":["https:\/\/www.facebook.com\/WipWare\/","https:\/\/x.com\/WipWare","https:\/\/www.instagram.com\/wipware\/","https:\/\/www.linkedin.com\/company\/wipware-inc-\/","https:\/\/www.youtube.com\/user\/Wipware"],"description":"WipWare Inc. es pionera en el an\u00e1lisis \u00f3ptico de part\u00edculas, desarrollando software avanzado y sistemas de medici\u00f3n automatizados para la miner\u00eda, el procesamiento de minerales, los \u00e1ridos y otras industrias de materiales a granel. Las tecnolog\u00edas de WipWare miden la distribuci\u00f3n del tama\u00f1o, la forma, el volumen y el color de las part\u00edculas mediante im\u00e1genes de campo, sistemas montados en veh\u00edculos y monitorizaci\u00f3n continua de cintas transportadoras para ayudar a las operaciones a mejorar el control de procesos, el rendimiento de la fragmentaci\u00f3n y la eficiencia de la producci\u00f3n.","email":"sales@wipware.com","telephone":"+1-705-472-2664","legalName":"WipWare Inc","foundingDate":"1986-05-18","taxID":"894994771","numberOfEmployees":{"@type":"QuantitativeValue","minValue":"1","maxValue":"10"},"publishingPrinciples":"https:\/\/wipware.com\/newsfeed\/","ownershipFundingInfo":"https:\/\/wipware.com\/about-us\/","actionableFeedbackPolicy":"https:\/\/wipware.com\/privacy-policy\/","correctionsPolicy":"https:\/\/wipware.com\/terms-and-conditions\/","ethicsPolicy":"https:\/\/wipware.com\/about-us\/","diversityPolicy":"https:\/\/wipware.com\/about-us\/","diversityStaffingReport":"https:\/\/wipware.com\/about-us\/"},{"@type":"Person","@id":"https:\/\/wipware.com\/it\/#\/schema\/person\/44f82b527b7df4ccce9afb09c1f1c375","name":"kim coyle","image":{"@type":"ImageObject","inLanguage":"es-CL","@id":"https:\/\/secure.gravatar.com\/avatar\/f5dce10b9fd06f52ce046161568a2bf9802a102cbfbe74d1ca5ac2312482d633?s=96&d=mm&r=g","url":"https:\/\/secure.gravatar.com\/avatar\/f5dce10b9fd06f52ce046161568a2bf9802a102cbfbe74d1ca5ac2312482d633?s=96&d=mm&r=g","contentUrl":"https:\/\/secure.gravatar.com\/avatar\/f5dce10b9fd06f52ce046161568a2bf9802a102cbfbe74d1ca5ac2312482d633?s=96&d=mm&r=g","caption":"Kim Coyle"},"url":"https:\/\/wipware.com\/es\/author\/kimcoyle\/"}]}},"_links":{"self":[{"href":"https:\/\/wipware.com\/es\/wp-json\/wp\/v2\/posts\/2482","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/wipware.com\/es\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/wipware.com\/es\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/wipware.com\/es\/wp-json\/wp\/v2\/users\/6"}],"replies":[{"embeddable":true,"href":"https:\/\/wipware.com\/es\/wp-json\/wp\/v2\/comments?post=2482"}],"version-history":[{"count":4,"href":"https:\/\/wipware.com\/es\/wp-json\/wp\/v2\/posts\/2482\/revisions"}],"predecessor-version":[{"id":11180,"href":"https:\/\/wipware.com\/es\/wp-json\/wp\/v2\/posts\/2482\/revisions\/11180"}],"wp:featuredmedia":[{"embeddable":true,"href":"https:\/\/wipware.com\/es\/wp-json\/wp\/v2\/media\/6046"}],"wp:attachment":[{"href":"https:\/\/wipware.com\/es\/wp-json\/wp\/v2\/media?parent=2482"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/wipware.com\/es\/wp-json\/wp\/v2\/categories?post=2482"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/wipware.com\/es\/wp-json\/wp\/v2\/tags?post=2482"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}